K-type Reciprocating Coal Feeder(Anthracite)

K-type Reciprocating Coal Feeder(Anthracite): 1.Simple Structure, Reliable Operation 2.Long Life, Easy Maintenance

Uses of Products:

     K-type reciprocating Coal feeder is used for coal or other loose granular materials of small mill cut and small viscous. It will make materials unload the transport equipment or other screening devices continuously and evenly from the material silo.

Operating Principle:

     K-type feeder is composed of the rack, floor (to the trough), transmission platform, the number one drain, gate and roller. When the motor is activated by the flexible coupling, reducer and Crank, which will drag bottom floor tilted 5 degrees doing linear reciprocating motion and make materials unload other devices evently.The machine can be equipped with a funnel or without funnel forms according to the customer’s requirement

NOTE: Coal feeder has two structural forms: One with adjusting gate.

            The other without adjusting gate, its ability to feed is achieved by adjusting the gate.

          

Main Technical Parameter:

Model specifications			K-0	K-1	K-2	K-3	K-4
Feeding capacity (t/h)	Floor schedule	Crank position	Anthracite
	200mm	4	100	150	225	330	590
	150mm	3	75	112	170	247	440
	100mm	2	50	75	133	165	295
	50mm	1	25	39	55	83	148
Crank Speed(r/min)			57	57	62	62	62
Motor	Model		YB160M1-8	YB160M1-8	YB160M1-8	YB160M-8	YB200L1-8
			Y160M1-8	Y160M1-8	Y160M1-8	Y160M-6	Y200L1-6
	Power(kw)		4	4	4	7.5	18.5
	Speed(r/min)		720	720	720	970	970
Reducer	Model		JZQ-350	JZQ-350	JZQ-350	JZQ-400	JZQ-500
	Speed ratio		12.64	12.64	12.64	15.75	15.75
Max.feed size(mm)	Content below 10%		250	350	400	500	700
	Content of more than 10%		200	300	350	450	550

K-type Reciprocating Coal Feeder(Anthracite)